|
|
Design of precast foundation for machinery
Šandor, Peter ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The bachelor‘s thesis main focus is the design of reinforced concrete foundations. The purpose of this thesis is to design the height of the foundation and the dimensioning of the reinforcements. It also deals with tilting and carrying capacity of the foundation gap. Mechanical drawings of the reinforcements and the shape of the foundation are also part of this thesis
|
|
|
Concrete slab of family house
Sivčák, Jozef ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The main aim of Bachelor thesis is design and assessment of detached house´s reinforced concrete slab. The ground plan of slab is bent under rake angle 120° and there is a hole for staircase. Internal forces are calculated by finite element method and verified by replacement beam method, but the model for manual design is simplified. Reinforcement is designed for design values of internal forces from finite element method. Outcomes of calculations are building drawings of reinforcement, where the most exposed part, angled part, is solved. Also, tangential internal forces from bended reinforcement in every layer are solved there. Design and calculations were realized by current norms.
|
|
|
The load bearing structure of multi-storey reinforced concrete builidng
Burda, Patrik ; Švaříčková, Ivana (referee) ; Šimůnek, Petr (advisor)
The diploma thesis is focused on design on loadbearing reinforced concrete structure of multi-storey apartment building with shops and offices on the ground floor and underground garage. The thesis consists of the analysis and design of ceiling slabs above underground floor, supporting columns and the beam under the underground floor ceiling slab. Calculation 3D model was created to determine internal forces. All structures are designed according to EC2, ČSN EN 1992-1-1. The thesis includes elaboration of static calculation, shape drawings, drawings of reinforcement of solved structures. The rest of the project part are not analysed.
|
|
|
Reinforced arch bridge over the Krupá river
Adler, Filip ; Pěkník, Robin (referee) ; Koláček, Jan (advisor)
This Bachelor thesis deals with the design of new bridge situated in place of an original one in Staré Město pod Sněžníkem. The original bridge is used to transfer the traffic of local road built in category of S7,5 over the Krupá river. Its construction system is designed as an arch with upper deck, with a span of 18m. Loads and construction assessment correspond to Eurocode. Calculations were performed via Scia Engineering software, version 2013.0.
|
|
|
Rebuilding a Family House
Zlámalová, Pavlína ; Požár, Michal (referee) ; Švaříčková, Ivana (advisor)
The thesis deals with the reconstruction of the family house. The main aim of my thesis is assessment of the existing floor slab and designing of reinforcement due to lack of static part of design documentation. Internal forces on the slab are obtained by using finite element method on which the slab is designed. Due to superstructure of one extra floor above original structure it is necessary to make the hole for the staircase into the existing ceiling construction and demolition of loadbearing wall for disposition improvement. Intervention into the original construction has the effect of redistribution internal forces. At this case additional reinforcement of floor slab is necessary. For additional floor slab are selected and designed CFRP carbon straps. Rotate rib is being prepared instead of original demolished loadbearing wall which will be connect with original floor slab by using of stirrups. All calculations were performed in accordance with valid standard.
|
|
|
Cast-in-place basement of cottage in Kronfelzov
Renczes, Gábor ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place basement of a cottage in the town Kronfelzov. The thesis includes a technical report, static analysis, drawing documentations and visualizations. The calculation of the internal forces was performed by the software Scia Engineer. The drawing documentation consist of a shape and reinforcement drawings of the supporting parts.
|
|
|
Concrete slab of family house
Sivčák, Jozef ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The main aim of Bachelor thesis is design and assessment of detached house´s reinforced concrete slab. The ground plan of slab is bent under rake angle 120° and there is a hole for staircase. Internal forces are calculated by finite element method and verified by replacement beam method, but the model for manual design is simplified. Reinforcement is designed for design values of internal forces from finite element method. Outcomes of calculations are building drawings of reinforcement, where the most exposed part, angled part, is solved. Also, tangential internal forces from bended reinforcement in every layer are solved there. Design and calculations were realized by current norms.
|
|
|
Rebuilding a Family House
Zlámalová, Pavlína ; Požár, Michal (referee) ; Švaříčková, Ivana (advisor)
The thesis deals with the reconstruction of the family house. The main aim of my thesis is assessment of the existing floor slab and designing of reinforcement due to lack of static part of design documentation. Internal forces on the slab are obtained by using finite element method on which the slab is designed. Due to superstructure of one extra floor above original structure it is necessary to make the hole for the staircase into the existing ceiling construction and demolition of loadbearing wall for disposition improvement. Intervention into the original construction has the effect of redistribution internal forces. At this case additional reinforcement of floor slab is necessary. For additional floor slab are selected and designed CFRP carbon straps. Rotate rib is being prepared instead of original demolished loadbearing wall which will be connect with original floor slab by using of stirrups. All calculations were performed in accordance with valid standard.
|
|
|
Design of precast foundation for machinery
Šandor, Peter ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The bachelor‘s thesis main focus is the design of reinforced concrete foundations. The purpose of this thesis is to design the height of the foundation and the dimensioning of the reinforcements. It also deals with tilting and carrying capacity of the foundation gap. Mechanical drawings of the reinforcements and the shape of the foundation are also part of this thesis
|
|
|
The load bearing structure of multi-storey reinforced concrete builidng
Burda, Patrik ; Švaříčková, Ivana (referee) ; Šimůnek, Petr (advisor)
The diploma thesis is focused on design on loadbearing reinforced concrete structure of multi-storey apartment building with shops and offices on the ground floor and underground garage. The thesis consists of the analysis and design of ceiling slabs above underground floor, supporting columns and the beam under the underground floor ceiling slab. Calculation 3D model was created to determine internal forces. All structures are designed according to EC2, ČSN EN 1992-1-1. The thesis includes elaboration of static calculation, shape drawings, drawings of reinforcement of solved structures. The rest of the project part are not analysed.
|
guest ::
